Souldread's Showcase

souldread · Post by **souldread** » Sat Feb 17, 2007 7:15 pm

I'll get right on it, thanks for the heads-up!

souldread · Post by **souldread** » Sat Feb 17, 2007 7:27 pm

Ok, I fixed the errors addressed in your post, so here is an updated version!

theviking · Post by **theviking** » Sat Feb 17, 2007 10:47 pm

hi, i had a look at your esp and i found the following things:

The plugin is dirty; use a program called TESAME to clean it. You can find it at main/utilities on this site. Remove everything but TES3, your cell and any thing you made yourself.

The shrine:
the large chest floats and you should problably lock it,
the bowl floats,
the cup floats,
the candlestick floats,
the shrine bleeds into the carpet,
the carpet itself floats,
the back two benches float because they rest partially on a carpet-> move the carpet under then or move the benches away from the carpet,
the atronach tapestry floats,
the dibella tapestry as well, but a little less,

The sleeping room:
you can bleed the pillows more, they are soft so they bleed,
the leftmost chest bleeds into the pillar,
the back left chest is bleeding a tiny bit,
the back left bed is floating,
the center bed also floats, because it partially rests on the carpet, move that a little away from the bed,
turn the shield a little so that it also rests on the rim,
the right chest is bleeding within the pillar,

In the rest of the interior you make the same errors, so I advice you to perfect these two rooms. You'll learn a lot in the process and after that we'll perfect the whole interior. You show a lot of talent! I can see you become a TR_modder, you just need to reduce your floaters and bleeders first. The pathgrid and the lightning looks fine, so you know that already!

souldread · Post by **souldread** » Sat Feb 17, 2007 11:35 pm

Well, I fixed the errors you mentioned as far as I can see...
please let me know if I didn't!

theviking · Post by **theviking** » Sun Feb 18, 2007 12:18 am

Only the back left bed is still floating, and the center chest is bleeding by a tiny bit. You changed all that i said , and you did it quick. Well done!

Central hall:
the first table from the shrine is bleeding,
the chair next to it is floating,
turn the arrows so that they rest on two "wings" (this one is difficult),
the central table is bleeding in the carpet and the chair next to it is floating,
the silver claymore is floating,
the central carpet is floating,
the last table is bleeding and the chair next to it is floating,
the pauldron is floating,
the quill is floating a little bit,
the tapestry behind the crates is floating,

Only these things to fix and then i surely recommend you! (If i can)

Xui'al · Post by **Xui'al** » Sun Feb 18, 2007 12:59 am

theviking wrote: Only these things to fix and then i surely recommend you!

I think that would be a good idea. The mistakes were simply those of someone inexperienced, and beyond the technical issues the castle showed alot of promise.

souldread · Post by **souldread** » Sun Feb 18, 2007 1:35 am

Well... the one thing I could not figure out how to do was the arrows... how do you do it? They just don't seem to want to rotate! Any way, here is what I got done...

theviking · Post by **theviking** » Sun Feb 18, 2007 12:38 pm

With the arrows, you first turn them with x so that two wings are on the underside. (the arrow can be quite a way above or below the table) Then turn them using z. Repeat until they are just how you want them.

The left carpet still floats but you changed all the things I mentioned in my review. You are the first member that I recommend.

souldread · Post by **souldread** » Mon Feb 19, 2007 1:50 am

YAY! Thank you very much for recommending me, I really appreciate it! Hopefully someone with the power sees the same in me, as I can't wait to join TR!

Nanu · Post by **Nanu** » Mon Feb 19, 2007 4:02 am

I'm not even going to look at this.

You have motivation - we need that. You're getting skill - we need that. You no doubt have creativity - we need that too.

But you're going to have to be a bit better at the error fixing. Look over your interior before you submit it for any floaters or bleeders. Don't worry if Thrig catches something.

Do me a cave, or a tomb. Something dungeony, but small. No need to kill yourself on a second interior. Actually, make a small Velothi tomb and I'll let you use it for a filler int so it will get used.

Make sore that you check your int for errors first, you've came a long way in a short time. I appriciate that.

Do this, and I'll give you your rights.

souldread · Post by **souldread** » Mon Feb 19, 2007 4:09 am

I am happy to do more work, not sad in the least. And if this goes into the mod as filler, then it is even better. I will get started right away!

Nanu · Post by **Nanu** » Mon Feb 19, 2007 4:14 am

I'm glad you understand.

Xui'al · Post by **Xui'al** » Mon Feb 19, 2007 4:18 am

souldread wrote:I am happy to do more work, not sad in the least. And if this goes into the mod as filler, then it is even better. I will get started right away!

Excellent! I'm glad that we aren't going to lose you!

souldread · Post by **souldread** » Mon Feb 19, 2007 2:17 pm

Lose me? HEH! My devotion to TR couldn't be beaten by an extra load of work, if anything it is strengthened! (by the way, I already have the basic design of the tomb done, and am working on furnishing it)

Thanks for this chance to prove my self!

souldread · Post by **souldread** » Mon Feb 19, 2007 3:15 pm

Yay! I finished the tomb, and checked it twice for floaters or bleeders. I also cleaned the mod through TESAME. So, here it is!

theviking · Post by **theviking** » Mon Feb 19, 2007 3:53 pm

You can safely remove the nerano ancestral tomb in TESAME. Im guessing you used it as example, if you clean it with TESAME, nothing in the cell will change.

The big ashpit bleeds into the ground,(might be intentional)
the heap of bones in the big room rests unlogical,
the skull and the steel mace also rest unlogical,
some of the bones in the ashpit you can bleed more,
the back right brazier bleeds,
the steel saber rests unlogical,
3 of the 4 bones in the right room rest unlogical,
the rubies are bleeding,
the steel katana rests unlogical,
the imperial broadsword should be replaced, because this is a dunmer tomb, make it perhaps a chitin shortsword,
You're using quite a lot of medium expensive items, i'd say replace one or two items with poor items and reduce the pearls and rubies.

If this was released for the mod, i'd problably fix it and then it would be approved, because its a nice tomb. I know you can fix these errors and i really want to help you get promoted. For most of the bones, turn them with z or let them bleed a little. For the swords, turn them so that their blade is also touching the surface. Succes!

souldread · Post by **souldread** » Mon Feb 19, 2007 3:57 pm

Thanks! I guess I don't have the eyes to be a reviewer

Edit: Ok, here it is... yet again lol... this time it is REALLY cleaned

souldread · Post by **souldread** » Thu Feb 22, 2007 1:14 pm

Umm.... guys? It's been three days now, and nobody has even downloaded my file.... please when you get a chance, do so?

El Scumbago · Post by **El Scumbago** » Thu Feb 22, 2007 5:31 pm

Don't worry, delays are a usual phenomenon lately due to the big amount of work. Others have waited for weeks!

souldread · Post by **souldread** » Thu Feb 22, 2007 10:27 pm

LOL

Happy it didn't happen this time...

theviking · Post by **theviking** » Thu Feb 22, 2007 10:36 pm

Sorry, I had a really busy week;

the back right brazier still bleeds,
the saber bleeds,
the coda flower bleeds,

But you changed very much of what i said. You seem to understand the way the bones and the swords should rest. This tomb can be used as a filler interior, after fixing these three slight problems. I again recommend you for TR_moddership. When you are promoted, there are three caves from map2 in the unclaimed section. If you like to do caves we like it as well if you do one of those three. But please wait untill you're promoted and can claim one. That shouldn't take too long...

Nanu · Post by **Nanu** » Fri Feb 23, 2007 12:22 pm

If we could stop handing out bolded recommendations, that'd be great.

But yes, I'll add you to the usergroup, but you have to PM Haplo to get your your tag and junk.

groza528 · Post by **groza528** » Fri Feb 23, 2007 12:36 pm

If we could stop handing out bolded recommendations, that'd be great.

I'm sorry, is something wrong with the bolded recommendations? I picked up the habit from theviking because it looked like a pretty good idea to draw attention to the approval.

theviking · Post by **theviking** » Fri Feb 23, 2007 12:43 pm

Sorry, it just looked like a good idea. Ill hope i can grant many recommendations without using the bold in the future. Congratulations, souldread, welcome to the team!

souldread · Post by **souldread** » Fri Feb 23, 2007 6:57 pm

YAY!!!!! Thanks for all of you guys who helped me, and I will PM haplo right away!!!

souldread · Post by **souldread** » Sat Mar 10, 2007 2:46 pm

Ok, here this is, and it is ready for filler material! I had a little trouble with the saber, seeing as it has a rounded handle, but I think it looks okay now... so please do not find anything wrong with it! Lol...

theviking · Post by **theviking** » Sat Mar 10, 2007 3:07 pm

Lol, you could have moved on since you became a modder. But anyway, thanks for the tomb. Ill try to remember it and when someone needs it it will be included. I think this will be used for map 3 as a filler but maybe someone needs it before that.

souldread · Post by **souldread** » Sat Mar 10, 2007 3:18 pm

Thanks!

So... now on to the wonders of claiming...

Sload · Post by **Sload** » Sat Mar 10, 2007 8:48 pm

Nanu Ra wrote:If we could stop handing out bolded recommendations, that'd be great.

lol full circle

souldread · Post by **souldread** » Thu Mar 15, 2007 8:05 pm

Okay, here is what I am currently working on besides my int for TR... its a city called silingrad, Where you should COC is to Silingrad, Waterfront district. It is extremely a WIP, with only the Waterfront district more or less done.

souldread · Post by **souldread** » Fri Jul 13, 2007 5:50 pm

Anyone know how to convert a WAV File into an MP3 File?

Thrignar Fraxix · Post by **Thrignar Fraxix** » Fri Jul 13, 2007 11:08 pm

CNet is your friend. They undoubtedly have a tool for that.

Jedak · Post by **Jedak** » Sat Jul 14, 2007 12:13 am

If you have a program like Audacity, then converting is easy. What did you have in mind? Music? A sound file? etc.?

souldread · Post by **souldread** » Fri Jul 20, 2007 6:34 pm

music lol, that i recorded myself on an MP3 player... sound quality sucks, but its better than nothing lol

Jedak · Post by **Jedak** » Sat Jul 21, 2007 1:07 am

Look google on audacity, download it (its free). Look google on audacity tutorials, find one with how to convert to an MP3 file from a wav (it requres a small dowload and a few button checks and such, then the next time its just simple). That the way I did it.