Tamriel Rebuilt

Here's number 3:

[url=http://img128.imageshack.us/my.php?image=counter3jl4.jpg][img]http://img128.imageshack.us/img128/1964/counter3jl4.th.jpg[/img][/url]

Am I the only one for which imageshack doesn't work? I have to extract the code from your post and to paste it directly in the address bar to see them, the pics just refuse to be embedded. Weird.
http://img128.imageshack.us/img128/1964/counter3jl4.jpg


A couple of notes:
- On my schematics I used rounded for client side and square for bartender side, but this was to show how the two different angles were indeed different pieces. You do not need to have it rounded/square on the actual concept art.
- The materials used here aren't very clear. It seems the angled part is riveted, is it made of metal?

The angled part is made of the same materials as everything else. The idea I had was that the two pieces of leather would meet at the corner, then a third piece would go over them and be nailed down to prevent everything from being moved/blown away (assuming the lower class can afford nails). However, I am going to redo this since I don't need to follow the schematics exactly.

Well he didn't take the ten seconds or so it takes to make it a direct link, so it links to the default ad-laden page (with or without adblock so please don't mention that for a goddamn third fucking time) with all its scripts and slow-down behavior. If he had direct-linked it it would've been much nicer.

While working on my redo for number 3, I realized that the shape could work for number 4 if the sides were swapped.

Top view for 3 & 4:
http://img258.imageshack.us/img258/6906/counter34topnh2.jpg

Bartender/Client sides:
http://img396.imageshack.us/img396/616/clientbar34dq7.jpg

I apologize for the double post. Here is a wine rack for the bar set:

http://img78.imageshack.us/img78/4629/winerackrb0.jpg
http://img236.imageshack.us/img236/6734/winerackojk3.jpg

That winerack would fit well with [url=http://img175.imageshack.us/my.php?image=hammerfalllowerclass01ud2.jpg]Giln's cupboard[/url].

Now that my classes are out of the way, here are two keg holders, one bamboo and one wicker (couldn't decide which material so I did both).

http://img365.imageshack.us/img365/4260/kegfbbw2.jpg
http://img170.imageshack.us/img170/9182/kegsidecc5.jpg
http://img181.imageshack.us/img181/677/kegtopky7.jpg

EDIT: Quick question. Is there any furniture that has a priority over another? If so, please tell me.

The other furniture thread has a higher priority because right now it's empty...

Oh yeah, we have another furniture FCG... I sorta have been leaving that for Lighter when he gets back, but I will do some stuff if he doesn't show up in another week.

Alright, first up is that bar drape idea I mentioned a while back. It would open and close similar to a shower curtain:

http://img231.imageshack.us/img231/5020/bardoordrage5.jpg

If that doesn't work, I did come up with a door design:

http://img50.imageshack.us/img50/1050/bardoorbamuu3.jpg

Not sure if it fits the 'hammerfell mood' but here's some quick ideas.

[url=http://img217.imageshack.us/my.php?image=trobjectswickerfurnbe2.jpg][img]http://img217.imageshack.us/img217/9591/trobjectswickerfurnbe2.th.jpg[/img][/url]

Good work, Obagovo.

Myzel, I think they do work, but except for the bamboo/leather screen they seem more suited to middle class.

i like the drape idea, a good way to divide larger interiors. the whiker stuff is wonderfull for some kind of outdoor upper class me thinks.

So, the other day I walked into a bar, and then ZOMG LOOK AT WHAT I DREWED!!!

[url=http://img141.imageshack.us/my.php?image=tamrielrebuilttablesrf7.jpg][img]http://img141.imageshack.us/img141/4021/tamrielrebuilttablesrf7.th.jpg[/img][/url]

Thanks to PoHa for the anecdote. 2 tables if they suit your needs, I can probably flesh them out WHEN i get CS3.

Basically, a big fan of resin hardened materials I am. The tables structure is constructed from plaited rope (cheap). I was reminiscing about the armour I made ages ago. It seemed sensible for a structure and not for armour.

Anyway, then the wicker material is mounted around the structure, and is also resin hardened.

As for the small table. Cheap and cheerful. Again wicker cut to fit a cylindrical shape of an urn. Possibly an old platter to widen the base of the table, is mounted underneath the wicker, and then fastened further down the urn.

Meant to put some decorations onto the urn, but I doubt it's worth it. I would like to see a winding Sakatal around the bottom. Seems fitting for an urn.

But I just got too excited as I was walking to the bar, so I posted them.

Pound! Where have you been?

These tables look a bit smallish, though, more like bedside tables/nightstands than the type of table you can sit at.

(In fact, both of them could easily be used as stools, depending on the scale.)

The scale with which you'd need ropes to support them, would definitely make that a large table. But the urn could be adjusted as much as you want.

The table wouldn't have to be quite so exaggeratedly curved, mind.

I have been lazy and absent, that is all.

i just noticed we need a bamboo, wicker and leather table for the set. i suggest that thick bamboo stalks be used to make the table leg/legs and then the top is bamboo or wood slats. see Lighter's stool concept on the first page.

Here is a table, made for up to 4 people. It can be stretched/shrunk to accommodate different numbers:

http://img208.imageshack.us/img208/369/tablelclh7.jpg

It'll do the job. Anything else missing, Lady N?

I think thats it, this claim is now up and ready for modeling i suggest unstickying this thread but not locking it, we may need further concepts or clarification as the claim progresses.