i3-797-Ind

Yeti · Post by **Yeti** » Fri Jun 26, 2015 6:12 pm

Claim type: Interior
Claim ID: TR_i3-797-Ind (#2779)
Faction: Indoril
Parent claim: TR_3-40-Ind (#983)
Claimed by: Yeti
Status: Approved (Progress: 100%)
Location: 1:(813, -3662):0
Files: TR_i3-797-Ind_Yeti_1.esp; TR_i3-797-Ind_Yeti_2.esp; TR_i3-797-Ind_Yeti_3.esp; TR_i3-797-Ind_Yeti_4.esp; TR_i3-797-Ind_Yeti_5.esp; TR_i3-797-Ind_Yeti_6.esp; TR_i3-797-Ind_Yeti_7.esp

---

Almas Thirr, Waistworks

Includes large open atrium, entrances to Ordinator barracks and Temple offices.

Yeti · Post by **Yeti** » Fri Jun 26, 2015 6:13 pm

It'll be easier for me to just make this in the CS than try to draw a map for someone else to follow. Claiming.

Post by **Gnomey** » Fri Jun 26, 2015 7:32 pm

Granting. Good idea.

Yeti · Post by **Yeti** » Tue Jul 21, 2015 1:52 am

Uploaded file. Shell finished.

Theminimanx · Post by **Theminimanx** » Tue Jul 21, 2015 11:33 am

So, I don't want to sound like I'm complaining about your efforts, because I love the design of this place, but... this is a lot larger than any other waistworks in the game. Like, two times as large.

Also, the doors to other cells don't match the doors in the exterior cell, and (if I'm interpreting your layout right) would cause the same issue in the canalworks.

Yeti · Post by **Yeti** » Tue Jul 21, 2015 7:36 pm

I'm pretty sure I oriented the whole thing correctly to match the canton's exterior entrances. Have you looked at which way the north marker is pointing in the cell?

Cantons look pretty massive on the outside, so I don't think the size is too big an issue. Most players are able to take for granted that the Skar in Ald-ruhn is absurdly bigger on the inside, for comparison. That said, I'll try to tone in down with the hallways, since they are extending outward a bit much and contributing to the larger girth.

Theminimanx · Post by **Theminimanx** » Tue Jul 21, 2015 10:24 pm

As it turns out, I did interpret your layout wrong.

However, my uncovered idiocy did nothing to reduce my arrogance, and I noticed a few other things (that I'm hopefully less wrong about.)

The middle northern entrance should be lowered a bit. I know the sizes within cantons are nonsense, but it should at least be lower than the main hall.
I also had some problems with the entrance to the canalworks. A fancy hall right next to what is essentially the poor district seemed odd to me. It also moved the entire canalworks a bit too far east.

Because I wasn't being arrogant enough, I made some edits to fix this in the file below. Feel free to discard them if you want, I mainly included the file because I'm bad with explaining my opinion with words. I also added the WIP canalworks, for a more complete picture (excuse the terribly rotated fountains). I have not done any size reductions.

EDIT: Oops. Forgot to mention that the canalworks uses new meshes. Thanks for catching that Seneca.

Post by **Seneca37** » Wed Jul 22, 2015 10:18 am

Note: I made a couple of new interiors for this. You'll need to copy the attached nif's to the:
Data Files\Meshes\tr\i directory.

Yeti · Post by **Yeti** » Wed Jul 22, 2015 6:16 pm

Thanks for the suggestions, Theminimanx. I'll certainly take them into consideration.

Yeti · Post by **Yeti** » Sun Aug 23, 2015 7:19 am

Filed updated with feedback implemented, and a few other minor changes and additions (mostly minor detailing).

RyanS · Post by **RyanS** » Sun Oct 18, 2015 8:51 pm

Any progress to report?

Yeti · Post by **Yeti** » Mon Oct 19, 2015 4:24 pm

I'll get some work done on this as well. Again, it's mostly detailing that's left, and then making basic interior shells for the rooms that link to this, to keep their size consistent.

Yeti · Post by **Yeti** » Wed Nov 04, 2015 4:51 pm

Quick update to let everyone know I haven't forgotten about this. I dropped my laptop recently and its screen is all kinds of broken, which has put a bit of a damper on my modding activity. My laptop and I share a symbiotic relationship (for most of my time in college, we were practically a single organism), so I hope to replace the screen shortly.

Ironed Maidens · Post by **Ironed Maidens** » Wed Nov 04, 2015 5:48 pm

Sorry to hear that, but I can understand the symbolism for sure.

RyanS · Post by **RyanS** » Sun Dec 13, 2015 10:12 pm

Just checking up on this. Has your laptop been fixed?

Yeti · Post by **Yeti** » Mon Dec 14, 2015 10:22 am

Nope, but I have it hooked up to my TV screen using an HTMI cable. Not the best setup, but it works for the time being. Anyway, I worked a little on this tonight. I should have it finished this week. After that, I'll post shells for the interiors that will link to it.

Yeti · Post by **Yeti** » Sat Dec 26, 2015 9:00 pm

Finished. I'll make the claims for the connecting interiors later this week.

RyanS · Post by **RyanS** » Sat Dec 26, 2015 10:29 pm

Off to review!

sirrah · Post by **sirrah** » Fri Oct 07, 2016 9:04 pm

There is a flaw in the 'in_vs_pit*' elements that prevents them snapping together correctly; I've used a fixed mesh in this interior that I'll upload to the Asset Browser on the new forum.

Clean: Yes.
Northmarker: Good.
Illegal To Sleep Here: Set.
Lighting: Good.

Floaters:
furn_de_r_bench_01
furn_de_r_bench_01

Bleeders:
bk_HomiliesOfBlessedAlmalexia
furn_bone_rib_01
light_de_lamp_01_177
light_de_paper_lantern_01_128
light_de_paper_lantern_01_128
light_de_paper_lantern_01_128
light_de_paper_lantern_01_128
T_De_Set_BannerTemple_01
T_De_Set_BannerTemple_01
T_De_Set_BannerTemple_01
T_De_Set_BannerTemple_01
T_MwDe_Furn_Vs3Empty
T_MwDe_Furn_Vs3Empty
T_MwDe_Furn_Vs3Empty

Other:
Added some pillars and a wooden railing to give a sense the ceiling is supported.
Scaled up end-caps and ash-pits to prevent flickering.
Replaced 'light_de_paper_lantern_01_200' instances with 'light_de_paper_lantern_01'.
Added a 'light_de_paper_lantern_01_128' to south-western door.

sirrah · Post by **sirrah** » Tue Oct 11, 2016 6:19 pm

Thinking on this again, it's probably best not to add unique assets to Tamriel_Data if they're effectively just a bugfix; I'll upload a version using the original pit elements tomorrow.

sirrah · Post by **sirrah** » Thu Oct 27, 2016 12:26 pm

Uploaded the file below to the asset browser on the new site: http://tamriel-rebuilt.org/asset/review ... -old-forum

Well, it took me a little longer than anticipated, but here's a version without the fixed meshes.

Post by **rot** » Thu Jan 12, 2017 8:17 pm

transferred at
http://tamriel-rebuilt.org/node/1116